Double Glazing & Composite Doors in Mold
Warmer townhouses, quieter frontages and heritage-sensitive replacements — installed across Mold by a family team with 30+ years fitting windows and doors in Flintshire.
We work in Mold every week
Mold is 7 miles from our workshop — a 15-minute drive up the A494. As the county town of Flintshire it has one of the most varied housing mixes in the region: Georgian and Victorian townhouses along the High Street and King Street, 1930s semis on the Chester Road and Wrexham Road approaches, post-war council stock on the Broncoed and Bromfield estates, and newer executive developments out towards Sychdyn, Rhydymwyn and Nercwys. We've fitted windows and doors on every one of those property types over the last thirty years and know what works on each.
Coverage across Mold
We cover every Mold postcode (CH7 1) including the town centre, King Street, Chester Road, Wrexham Road, Broncoed, Bromfield, and the surrounding villages of Sychdyn, Gwernaffield, Nercwys, Rhydymwyn and Cilcain.
Response time to Mold
15 minutes from Ewloe on the A494. Surveys within 48 hours, most within 24 if you're flexible on time.
Mold property types we know
Georgian and Victorian townhouses in the town centre, 1930s bay-fronted semis on the arterial roads, 1950s–70s council semis in Broncoed and Bromfield, and modern executive detached houses on the village-edge estates.
Common Mold jobs
The most common Mold jobs are: fitting sash-style flush uPVC on Victorian townhouses, replacing tired 1980s and 1990s uPVC on the semi estates, upgrading composite front doors on the executive estates, and adding roof lanterns or bi-folds to rear kitchen extensions.
What we fit in Mold
Every service below is available across Mold with the same 10-year Assure-registered guarantee, free 48-hour survey and directly-employed installers.
uPVC Double Glazing in Mold
Warmer rooms and lower bills — Eurocell and Spectus frames with A-rated glass, fitted in around 3 weeks.
View service
Aluminium Windows in Mold
Slim sightlines and huge glass areas for modern extensions and rear elevations, in any RAL colour.
View service
Triple Glazing in Mold
Three panes and two gas fills for exposed elevations, main-road frontages and passive-standard builds.
View service
Composite Doors in Mold
Solidor and Rockdoor front doors with a solid timber core, 3-star cylinders and 10-year colour guarantee.
View service
uPVC Doors in Mold
Back doors and secondary entrances built for daily use — multi-point locks, low thresholds, no rot.
View service
Bi-Fold Doors in Mold
Aluminium bi-folds up to 6m wide with low thresholds and slim mullions for extensions and garden rooms.
View service
Sliding Patio Doors in Mold
Inline sliders with tall panes and minimal frame — the modern alternative to bi-folds on wider openings.
View service
Conservatories in Mold
Edwardian, Victorian, lean-to and P-shape conservatories with solid, glass or polycarbonate roofs.
View service
Roof Lanterns in Mold
Slim aluminium lanterns for flat-roof extensions — floods rear kitchens with daylight without solar gain.
View serviceWhy homeowners in Mold book us
Small, owner-led installer based in Ewloe — you deal with Simon and the same fitting team from survey to handover.
30+ years fitting windows and doors across Flintshire, Cheshire and Wrexham. No subcontractors, no sales agents.
Free on-site survey within 48 hours of your enquiry. Written, itemised quote — no pressure, no gimmicks.
10-year frame guarantee registered with Assure (Reg No. 1094) — cover survives the sale of the house.
£5m public liability cover and full dust-sheet, tidy-as-you-go installs. Site left as we found it.
5.0-star average on Google — reviews from real neighbours you can check before you book.
What we see on Mold properties
Location-specific issues we deal with regularly — property type, climate exposure and infrastructure factors that change how we spec a job.
Conservation area on the High Street
The Mold town centre conservation area covers most of the High Street, King Street and Earl Road. Replacement windows on properties there often need to match original sightlines and opener patterns. We spec flush-sash uPVC or aluminium mock-sash that satisfies most Flintshire planning officers.
Georgian and Victorian townhouse bays
Townhouses on King Street and Earl Road have tall Georgian or Victorian sash windows and often structural bays. Wrong replacements sag and look plastic from the street. We use structural mullions, proper reveal detail and slim sightlines.
Elevated exposure on hillside estates
Broncoed and Bromfield sit on the hillside above the town — westerly weather rolls off the Clwydian Range and hits the front elevations hard. Enhanced weather-seal profiles and correct drainage matter more on those aspects.
1980s uPVC failures on 1970s semis
A lot of the semi stock around Chester Road and Wrexham Road had first-generation uPVC fitted in the late 1980s — those frames are now yellowing, brittle and beyond economical repair. Full replacement pays back in energy bills within 7–10 years.
Rural cottage reveals
Cottages towards Sychdyn, Gwernaffield and Nercwys have deep stone reveals, irregular apertures and often no proper lintel above the window. We survey these carefully and specify structural packers and lintel checks before ordering.
Five steps, no surprises
Every install runs the same way, in every area we cover.
Free On-Site Survey
We come out within 48 hours of your enquiry, measure every aperture and check reveals, sills and lintels. No pressure, no gimmicks.
Written, Itemised Quote
Fully itemised: profile system, glass spec, colour, hardware. Composite doors back in 24 hours, windows within 3 days.
Order & Manufacture
Standard windows and doors run ~3 weeks, bespoke items 4–5 weeks, stock composite doors 7–10 days.
Expert Installation
Our own installers fit every job. Frames set square and plumb, sealed with low-modulus silicone, no drafts.
Testing & Handover
Every window and door tested for operation and seal. Site left clean, guarantees registered with Assure.
Mold — your questions answered
Do you cover Mold?
+
Yes — Mold is one of our core areas. We're based in Ewloe (CH5) and cover the town daily, from full-house window replacements to single composite door swaps. There's no minimum job size and no travel charge.
How quickly can you get to Mold for a survey?
+
Within 48 hours of your enquiry as standard. Most Mold surveys are booked within 24 hours if you're flexible on time slot. The survey itself takes 30–45 minutes depending on the number of apertures.
What does double glazing cost in Mold?
+
Prices depend on window count, opener configuration, glass spec and colour, so we don't publish per-window figures — every quote is measured and fully itemised after a free survey at your Mold property, so you can see exactly what you are paying for.
Do you handle emergency call-outs in Mold?
+
We're not a 24/7 emergency glazier, but if a customer has a broken pane, jammed door or failed lock we'll usually get out same-day or next-day. Call 01244 740219 first thing and we'll prioritise it.
Are your installers based in Mold or do you subcontract?
+
We're a small team of three — Simon (owner and fitter), Shaun (fitter) and Sue (paperwork and scheduling). Fitting is done by us, not subcontracted to third-party crews, so the people you meet at survey are the people on site.
What guarantees come with a job in Mold?
+
10 years on the frame, sealed unit and hardware, registered with Assure (Reg No. 1094) so the cover transfers if you sell. Composite doors carry a separate 10-year colour and structural guarantee from Solidor.
Can you fit sash-style windows on Mold townhouses?
+
Yes. We fit Eurocell Charisma flush-sash uPVC and Alunet mock-sash aluminium — both satisfy most Flintshire conservation area consents. If the property is listed you'll need Listed Building Consent, which we'll flag at survey.
Do you work on the village estates around Mold?
+
Regularly — Sychdyn, Rhydymwyn, Nercwys, Cilcain, Gwernaffield. Most of our village work is executive-estate composite door upgrades, replacing tired conservatory roofs with solid warm-roof systems, and adding bi-folds or patio doors to rear extensions.
Which brands do you fit in Mold?
+
Eurocell and Spectus uPVC, Alunet and Smart Systems aluminium, Solidor and Rockdoor composite doors. All 10-year guaranteed and registered with Assure.
Can you replace a conservatory roof in Mold?
+
Yes — solid warm-roof replacements over existing frames are one of our most common Mold jobs. They transform an unusable summer/winter conservatory into a genuine year-round room. Typically a 3–5 day install depending on size.
Book a free survey in Mold
30+ years fitting windows and doors across Flintshire. Free survey within 48 hours, written itemised quote, 10-year frame guarantee registered with Assure. Call Simon on 01244 740219 or use the contact form to book.
We also cover these areas near Mold
Small, owner-led installer based in Ewloe, covering Flintshire, Cheshire and Wrexham. Prefer a chat first? Call 01244 740219 or book a free survey.